Sound box cleaning method

1. Speaker
Speaker surface do not use wet cloth wipe, because the horn surface moisture is too heavy, will affect the durability of the unit and timbre, after wiping with dry cloth, with bilu bead spray wax spray dry cloth, wipe two can form a protective film, the appearance is much more bright.
2. Bass unit
Bass unit diaphragm effect treble unit is tough, but we should be very careful when cleaning, first small air pump to dust, and then with cotton sticks stained with water, light force brush the surface, some people think that with fire wine or day water decontamination effect will be better, but in fact those highly volatile liquid, may corrode the surface of the diaphragm, made difficult to repair damage, research, distilled water is already very enough.
3. Horn insertion
Horn insert is a few exposed metal in the whole horn, the most easy to rust, cleaning should also be particularly careful, first of all to loosen the metal button, remove the wire, and then use a rag with ignition wine to brush the surface, some people will use WD-40 to clean, but in fact WD-40 corrosive-force is too strong, rust at the same time will also corrode the horn insert surface metal, With fire wine is milder than the effect. After cleaning the surface, the paper towel can be twisted into a pointed tip, and then stained with fire wine to clean the hidden position of the inserted line.
4. Treble unit
The treble unit is the most vulnerable part of the whole horn, cleaning accidentally will dent the diaphragm, greatly affecting the tone, the safest cleaning method is to use the small air pump to clean the camera lens, blow away the dust on the unit, and then use the old soft toothbrush super light force to brush the dust around the unit, must not use a wet cloth to wipe, one is easy to dent, two may leave water clear.
5. Dust isolation net
The safe and effective method is to paste the surface of the dust screen with transparent adhesive paper, and then brush slowly and gently with an old toothbrush to effectively remove the dust accumulated in the dust screen.